Patterns for Pirates

P4P stylish, modern, wearable patterns

Oversized Sweater :: Easy Hacks

It’s here! It’s here! The comfiest, snuggliest, coziest sweater you will ever have. The Oversized Sweater includes so many options for both youth and adult but we couldn’t help ourselves…we wanted more! The P4P blog team is showing you how to make an Off the shoulder sweater, a mini dress, a color blocked one, the cutest pom poms hack ever and a higher side slit one. Enjoy!

 

…..

Off the shoulder

Off-the-shoulder shirts are my jam. I still remember falling all the way in love with the first one I saw Alex do for the Relaxed Raglan. This Oversized Sweater is the PERFECT top to hack into your favorite Pinteresty slouchy off-the-shoulder sweater. And it’s pretty easy! Grab your fabric and pattern pieces–let’s get started!

Layer your front, back and sleeve pieces on top of each other.

Measure down 1/2 inch.

Draw a line. This is going to be your new cut line.

Cut out your pieces.

**Tip: Place a clip on the front of the sweater to differentiate your pieces.

Sew your sleeves on first. They aren’t going to be sewn all the way up so remember that. You’re going to sew them on similarly to how raglan sleeves are done. They’ll look like this:

Once the sleeves have been attached to both the front and back pieces, it’ll look like this.

Cut a neckband 3 inches in width by 85% of your measurement of your shoulders (with shoulders down, measure around your body). Add the neckband.

Finish assembly as instructed in the tutorial and then rock the hell out of it!

I’m wearing a hachi sweater knit in a straight P1 with a curved hem.

…..

Mini dress

Next up, we have a mini dress hack. I love anything that I can wear that’s comfy, but that’s also really sexy, and this mini dress hack fits the bill perfectly.

For this version, we’ll be using the high-low hem option of the sweater.  Because the bottom of both the front and back pieces of the bodice are straight, it’s very easy to simply add length to the bottom of these to lengthen your sweater into a dress. How much length you add to the bottom of your pattern pieces is completely up to you, but I found that 4 inches was perfect for the “mini” look I was going for.

When cutting out both the front and back pieces of your sweater, simply add 4 inches to the length at the bottom of each. Please note that the high-low bands were not changed at all for this hack; only the length of the main body pieces have been altered.

Cut and sew together the rest of the sweater as described in the tutorial, and voila! You now have a cute and very trendy mini dress, ready to go!

…..

Poms

If you’re anything like me you might have an addiction to Faux Fur Poms especially on the littles! They are just so cute! I’m going to show you a quick and easy way to substitute the ears for Poms! You’ll sew your hood together exactly the same as all of the instructions but before sewing the hood I recommend marking your ear placements slightly past the seam allowance in a washable pen that way you know where to place your poms. Then I highly recommend adding interfacing where your poms will be for added durability especially if using a pom with snaps.

 

Now if you have a sew on pom you’ll sew it right along the markings you made for the ears. I recommend going directly through the seam allowance, once again for added durability.

 

If you are using a pom with snaps (which I recommend for washing purposes as well as pom changing fun!), push your seam allowance toward the back of the hood and attach your snap through your interfacing and the seam allowance.

and wallah! You are done and now have super cute pom ears!

 

Happy Sewing,

Michelle

 

…..

Colorblocked

I am all in anytime that I have a chance to sport some spirit gear for our local team (Go Grizzlies!). Awhile ago, I was doing some aimless browsing and came across a colorblocked sweatshirt that was absolutely perfect. Of course they didn’t have our team colors, but the oversized sweater was the perfect starting point to recreating this sporty look.

To begin, you will want to divide the front and back bodice pieces, as well as the sleeve, into the sections. For mine, I began with the front bodice piece. I measured 5″ down from the neckline and placed a vertical line. I then measured 6″ below that to create my second color block. The remaining section will be for my third color block.  For the back bodice, I lined up the bottom hemline of both front and back piece, and transferred my lines to this piece as well.

To create the colorblocked sleeve, I began by aligning to top of the sleeve with the front bodice neckline and again, transferring these lines.

Once the lines are drawn, you will then need to cut your pieces on these lines (you can also fold your pattern on each of these lines if you’d rather not cut your original). To cut the fabric, you will need to add an additional 1/2″ to each line you drew, both to the top and bottom colorblocked sections of this line, to account for the seam allowance.

Now that you’ve cut out your pieces (phew, wasn’t that fun?! haha), you will begin to reassemble the bodices and sleeves. With right sides together, match up each colorblock section and sew using a 1/2″ SA.

Once your pieces have been sewn together, you will then follow the original tutorial to construct your sweatshirt.  And just like that, you’re now ready to show off your favorite colors, prints, or school spirit all in one fun, colorblocked sweater!

…..

Higher side split

Let’s end this easy hacks series with a Pinterest inspired hack. One of the testers shared a picture of a high side slit oversized sweater and I knew I just have to have one. This is super easy look to achieve!

I chose to make the slit 5″ but that is just a mild suggestion. You can certainly make it bigger (or smaller) if you’d like. Mark 5″ up from the bottom raw edge on all 4 side seams. You can use pins, clips or a tailor chalk.

Sew the pattern as instructed in the tutorial but stop the at the 5″ mark. You may find this step easier to be done if you sew (at least the last few inches) with a sewing machine. Repeat the steps on the other side.

Press a 1/2″ hem on both sides of the side seam. Stitch the hem down with a zig zag stitch, twin needles or a coverstitch.

Continue adding the front and back bands ad in the tutorial. See that was super easy!

I did the hack on my turtleneck version but it would be super cute on all neckline.

Tip: If you would like to make the high side seam on the curved hem option you would have to sew the side seams the same way you do the high low option. 

 

Hope you enjoyed these as much as we loved making them for you. As always, don’t forget to show off your creations in the P4P Facebook group or Instagram (use #patternsforpirates) so we can ohhh and ahhh over them!

Gala Gown :: Easy Hacks

It’s a Gala Hacks party! In true P4P fashion, our amazing blog team has some fun, easy hacks and mash ups ready for you.

…..

Gala – Sweetheart mash up

There’s no denying that the Gala Gown has all of the drama and beauty needed for all of those amazing times in our life. However, it can also be transformed into a fun little top with very little effort! I used the bodice of the Gala Gown for this look, however I paired it with the peplum skirt option from the Sweetheart Dress. 

To create this look, cut and assemble your bodice from the Gala Gown as directed in the tutorial. You will then want to use the peplum skirt option from the Sweetheart Dress. Mark the quarter points on both the bodice and the skirt. Slip the skirt over the bodice, right sides together, and match quarter points. Attach using a ½” SA. Finish your peplum by hemming and you’re all done!
~ Erinn

…..

Gala – Pencil Skirt mash up

Loving the new Gala top but looking for something a little more form-fitted through the hips?  I’m going to take you through a super quick and easy mash with the Freebie Pirate Pencil Skirt that’ll give you a totally different look. Go ahead and grab your Gala Bodice Lining and your Pencil Skirt Pattern (high rise height) pieces.  You’ll want to make sure the bodice bottom is close to the same width as your pencil skirt top for mashing (based on your sizing it should be).  You may have to grade your pencil skirt pieces slightly to match the Gala Bodice.  I did this through the added waistband height.

Next, you’ll need need to add the Pencil Skirt band height to your pencil skirt pattern.  You’ll take the given band height and divide it by 2 and then add that to the top of your pattern pieces.  For example- the band height on mine called for 5 inches so I added 2.5 to my pattern piece ( since the band is folded in half for the actual skirt height).  This is what you’ll cut for the bottom of your dress.

Now, sew your bodice as directed in the pattern and the side seams of your pencil skirt.   You’ll end up with two separate pieces that look like the photo below.

Finish your dress by sewing your bodice to your skirt piece just like you would if you were sewing the standard Gala skirt and you’re done!  Totally new look- perfect for New Years’ Eve fun!

 

Happy Sewing and Cheers,

Michelle

 

…..

Gala – Boundless mash up

It’s no secret that the Boundless dress is one of my favorite P4P dresses so it was only natural that I would mash the Gala Gown bodice with the Boundless skirt. This is a super easy hack.

All you have to do is cut the Gala Gown bodice and sleeves and the Boundless skirt. I used bamboo knit for my whole dress but if you used stable knits for the top, I encourage you to use fabric with great drape for the skirt.

Sew the top and the skirt as instructed in the patterns. You will be adding the skirt as in the Boundless tutorial, using elastic to stabilize the waist.

Hack: I used the width of the fabric and stitched the skirt in a loop. I marked the sides and front of my skirt and attached it to the bodice with the seam in the back. 

…

Ribbon Belt

I see a lot of posts wanting something to really highlight the waist when wearing a dress, but if you’re wearing a more formal dress you might not have a belt that goes! A ribbon belt can be very elegant and simple to create to give yourself a little more definition or attention to your waistline.  You can grab any ribbon style you’re drawn to that coordinates with your dress and attach whatever embellishment you find that makes your heart sing!

Some ideas would be appliques, belt buckles, brooches, fabric flowers, hair-clips, bows, etc.  I picked up satin ribbon and some great velvet ribbon as well.

To create it you just need to cut your ribbon as long as you’d like- so the waist measurement plus enough to tie a bow and however long you want  your tails.  I like to have my tails go to almost the very bottom of my hem personally, but that’s just personal preference.  Make sure you finish the edges if you pick a ribbon that frays.  Satin ribbon I prefer to heat seal with a flame.

Find the center of your cut ribbon and attach your embellishment with hand stitching.

There! You now have a beautiful belt that will look stunning on your more formal dresses! It’s quick and simple for such a fabulous add on and the possibilities are endless!

 

Here a a few modeled with the Gala Gown.

Judy

Which hack will you make first? Don’t forget to share your creations in the P4P Facebook group so we can all admire them too.

Fierce Bra and Undies – Easy Hacks

Ahoy, pirates! In true P4P fashion we could not let the DOUBLE release happen without showing you some simple hacks for your new Fierce Undies and Bra. All these simple mods can be applied to both our adult and youth pattern.

…..

Undies with bands

   

I love the new Fierce Undies. They feel so amazing! But I know sometimes I prefer a knit waistband instead of elastic. So today I will be showing you how to hack a knit waistband on the Fierce Undies.

 

The first thing I did was cut and assemble the pattern according to the pattern. Then I measured the top of the undies to see how wide it is.

Now here is the formula I used to the band width: (undies width X 2)+1 X 80%. I like to use 80% because I like my band a little smaller but not too tight. Here is a picture of my measurements. 

So my finished number is 24.8. So I cut my band at 4” tall and 24.8 wide. I cut my band 4” high because I like the 2” thickness. I fold my band short ends together and sew.

Then I fold it again raw edges together.

 

Now I quarter the band and undies, then I put the band over the undies with right sides together matching the quarter marks.

Sew the band on, top stitch if desired.

Now you have a knit and Fierce undies! 

 

 

 

…..

Undies with picot lace

Nicole will show us how to add picot trim to the leg opening soon!

…..

Bra with knit biding

For this hack, we will be using knit to create a binding instead of fold over elastic (FOE). This is a a great hack to use if you don’t have any FOE on hand or if you want your binding to be a cute print or exact match of one of your fabrics.
To get started, cut out the three 2” strap pieces using the width measurements as indicated in the elastic cut chart according to your size. Optional: serge along the long edges for additional stability. Then, press all three binding pieces into 1/2” strips: Fold pieces in half, press, open back up, then bring raw edges to meet at the center crease, press, fold in half, press.
Open up your binding neckline piece, match the center point of binding (right side) to the center point of the neckline (lining side). Stretching slightly, stitch along the neckline using a stretch stitch and a 1/2” seam allowance (along the first crease).
Finger press binding and seam allowance up, then re-fold the binding in the same manner as done previously to get a 1/2″ strip. Re-fold the entire strip to form your straps and pin/clip in place. Stitch using a stretch stitch along the entire binding to close and finish the binding/straps.
Continue with pattern instructions for construction. Repeat binding steps with outside straps: be sure your binding pieces are open before stitching the ends together when getting started on the outside straps.
 
and now you have your own custom knit binding! <3
(bra pictured has elastic band attached differently than pattern)
Lacy

…..

Youth bra with cups

My daughter is getting to be that age that she wants just a bit more coverage and loves all her ready to wear sports bras that come with padded cups. The first thing that she asked me about the new fierce bra is if it had cups and I said no but not to worry I could add them for her.  This hack is super easy and the construction does not change at all!  Let’s get started!

First we are going to trace off our front piece, next we need to create an opening for our cups to slide into.  I used my french curve but you can certainly free hand a curve similar to what I have shown here.  I just estimated how big to make it, it does not need to be to big, you want to be able to easily slide a cup in and out of it.  Next cut away the line you drew on your piece, this will now be your lining piece. You will cut one main front and one lining from your newly created piece.

Your construction will stay exactly the same, you will just have the curves in your lining piece.  I choose not to finish the edges of my curves as I was using a really nice quality athletic fabric but you can always finish that edge with your serger or with a narrow hem on your sewing machine.  Once finished you will be able to slide in cups, I just grabbed a set from my daughters ready to wear bras but you can also buy bra cups and cut them down to fit.  My daughter is only 10 and really doesn’t need them to add any type of support she just likes the extra coverage so really any cheap cups from Amazon will do the trick and are easy to cut to size.

All done and my girl is happy to have a bra made to fit her perfectly

Angela

…..

Undies with lace band

Up next I wanted to show you another way to add a waistband to the Fierce Undies. Instead of the 3/4″-1.5″ waistband elastic you can use stretch lace. I used 1″ for my example but 1.5″ would work beautifully as well. Start by cutting your pattern as instructed but cut stretch lace instead of elastic.

Sew the short ends of the lace to form a loop. You may find it easier to use a piece of water soluble stabilizer between the machine’s feed dogs and the lace so as to deter your machine from trying to “eat” your fabric.

Sew the undies as instructed in the tutorial. Pin the lace at the top, overlapping 3/8″. The wrong side of the lace will be against the right side of the undies. Sew in place using a zig zag stitch of a coverstitch.

Tadah!  Done! You just added one more option to the Fierce Undies.

Judy is rocking a pair of Fierce Undies with a 2″ lace band.

…..

Swim suit

Last but certainly not least we want it to show you how easy it is to make  Fierce Swimsuit. You will need:

  • swim suit fabric
  • swim lining (or solid swim like I used)
  • 1″ swim elastic for the waistband and under bust band
  • 3/8″ swim elastic for the leg openings and bra straps
  • optionally power mesh and cups (I have not used them on mine)

Start by cutting you undies front and back pieces from swim, the liner from solid swim or lining. Cut the waistband 3″ by the length of the waistband elastic (from the cutting chart) plus 1″ for the seam allowance. Cut the 1″ swim elastic the length of the waistband elastic from the chart. Now cut the bra pieces, making sure that the under bust band is 3″ wide by the length of the elastic plus 1″ seam allowance. You will also need to enclose swim elastic in the bra straps so you will but binding strips that are 1.5″ wide by the length of the pattern straps pieces.

Sew the undies and side of the bra (and lining) as instructed in the tutorial. Now let’s make the waistband and the bra under bust band. Same technique…butt the ends of the elastic together and sew with a wide zig zag stitch. Overlap the band with the right sides together and sew it in a loop using 1/2″ seam allowance. Insert the elastic inside and put pins or clips at the quarter mark. Put the bands aside for now.

Hem the legs of the undies as in the pattern. The only difference will be that you will be using swim elastic for the briefs and thong, no elastic for the cheekies. Take your swim elastic and baste it to one edge of each of the bra straps.

Attach the bra straps binding as Lacy is showing you in the hack above.

All you have left to do is add the waistband and under bust band that you prepared earlier. Mark the 4 quarters of the undies waist and under bust opening. Add the respective band matching the quarter points. Sew them with your serger or a triple stretch stitch. Optionally, top stitch.

All done! You just added one more swim suit to your collection. You can use the same tips for both the youth and the adult pattern.

We hope you enjoyed these spins on the new Fierce Undies and Fierce Bra pattern. Don’t forget to share your creations in the Patterns for Pirates Facebook group or tag us on Instagram @patternsforpirates.

 

Twist Back Top Easy Hacks

The Twist Back Top features a super fun back that inspired us to show you some easy hacks that will add some more options to the pattern. Let’ get started!

…..
Criss Cross Back Strap

 

Criss Cross Hack Twist Back

The new Twist Back top is so much fun to wear and style. While I love both the single strap and no strap options, adding a criss cross back strap is an easy and quick hack for another great look.

Begin by cutting and assembling your pattern according to the instructions for whichever sleeve length you choose. After your top is completely sewn together, take your Back Strap Pattern Piece and instead of cutting one, cut out two. I also like to add a little extra length here to play with while placing the straps. I added about an extra inch and a half to mine.

Sew the strap pieces and turn right sides out according to the pattern. Once you have two straps, begin placing them on your twist back top. I used the pattern’s back strap placement mark to place the top pieces of my criss-cross and moved around the straps until I liked how it looked. Be careful not to stretch your straps too much while placing, while also not having too much slack. You want the straps to lay flat while wearing. The best way to ensure the correct placement is to try on your top before sewing the straps in. I ended up moving mine around a little here and there before I was happy with the placement. In the end you can see my strap pieces are about 3 inches apart from each other.

Sew your straps in place and trim off any excess fabric. You now have a fun new criss cross back strap.

Shannon

…..
Bow Back

   

The Twist Back Top is already so much fun but if you want to add another little detail, I am here to show you how. Instead of the back shoulder strap, I added some ties to make a cute little bow and you can too with these simple steps!

You will start off just as the pattern instructs, with cutting your pieces. The only difference will be when it’s time to cut that back shoulder strap. You can use any length desired to make them longer or shorter but I used the included pattern piece as a guide for the youth version and it worked out perfectly.Instead of cutting one piece, I folded my fabric in half and cut two shoulder strap pieces on the fold. This gave me two pieces that were both double the size of the pattern piece. For the youth size 6, my  ties ended up being 11.5″. (I shortened them from this photo)You then fold the straps in half, with right sides together, and sew along the long edge and ONE short edge. Turn your straps right side out and press. Note that using this method, your seam will be along one edge as opposed to the middle like the original back shoulder strap. 

Find your shoulder strap marks and attach one tie to each side at the markings. Before you sew on, it is a good idea to clip or pin them in place, and check the length of your ties. Once they are sewn in place, continue on as the pattern instructs and then you will have your adorable new top!

…..

Banded Tank

The muscle tank look may not be for everyone and we get that so I’m going to show you how to do a super simple banded hack–it’s unbelievably easy!

Instructions:

Print, cut and assemble the pattern just like the directions advise to.

When you get to the part about hemming the armcyce, stop!

Measure the armcyce (front and back) and then multiply this number by 85%.

Cut bands from your fabric with a 2in height and whatever 85% of the armcyce is.

Add the bands to the arms and boom! You’re done!

Just that easy!

…..

Hemmed instead of banded

Last but not least I wanted to show how your Twist Back Top would look if you skipped the bands and simply hemmed the back and neckline. This is such an easy hack because it can be used for both tank and dolman and you do not need any new pieces.

Start by printing and cutting the pattern according to the style preference and sizes. I went with the tank option in a rayon french terry. Do not cut the two back band or the front neckline one. Mark the strap placement according to the pattern. For the mark, draw a line that is at least 3/4″ long.

Sew the shoulder seams. Press the back and neckline 1/2″. Optionally you can use pins or clips to hold it in place. For rayon french terry I found that I do not need pins along the back once pressed and steamed.

Using your coverstitch or a zig zag stitch (or twin needle) on your sewing machine hem along the pressed edge and iron it again.

All you have left to do is sew down the back strap using the markings you made earlier. I used a zig zag stitch for this step.

All done! All you have left to do is enjoy your new top and show it off.

Now that you have these additional options in your portofolio, start creating your unique Twist Back Top  and make sure to share them in the P4P Facebook group.

Hepburn Top and Dress – Easy Hacks

The Hepburn Top & Dress has released and it will surely become a staple in your year round wardrobe. Our amazing (and growing) team of blog contributors has some easy hacks for the new pattern. Take a look and get sewing!

…..

Swim top/rashguard

The fit of the Turtle Neck Dress is so fantastic that modifying it to be a a rashguard is very simple!

The first thing you need to do is decide which pattern options you would like to use and gather your supplies. Swap out your sweater knit for some swim knit, and your clear elastic for swim elastic.

Cut out your pattern pieces and neckline elastic according to the tutorial. For all options, you will continue on following the tutorial until it is time to hem.

If you choose to make a cropped swim top, like I am, you may want additional swim elastic for the bottom hem. This will help keep the hem from rising up while swimming. For this option, you will want to trim half an inch from the bottom of the front and back bodice pieces.

 

I simply wrapped the elastic around my waist and cut at a comfortable length. The elastic will be attached in the same way you attach the neckline elastic for the crew neck.

All other hemming options can follow the tutorial. Now you can enjoy your new swim top!


…..

Zipper Workout Bra

For this hack, we will be working with the crew neck, crop, tank option. In addition to the materials listed in the pattern, you will also need: 

  • Fabric for the lining
  • Zipper that is slightly longer than the shortened crop bodice (detailed below)
  • Wash away wonder-tape (our new BFF!)
  • FOE/knit binding
  • 1” elastic
  • Soft bra cups
  • (Optional Hook & Eye Closure)

1. Assemble Bodice and Lining

2. Attach Zipper with Wonder Tape!

Find the center of the front neckline, cut straight down from top to bottom.

Place a strip of wonder tape from top to bottom along the edge of one half of the bodice. Do the same for the coordinating lining piece, peel off the paper strip.

With right sides together, place zipper along the edge of bodice.

Next, peel off paper strip on lining and place wrong side of zipper along right side of lining.

Check to be sure zipper is placed correctly, gently finger press in place. (Clip in place if needed).

Stitch 1/4’’ away from the zipper from top to bottom.

Repeat with other side. Your fully lined zipper is now attached with just two lines of stitching!! Zip up zipper, add reinforcement stitches across the bottom of the zipper, and trim the extra zipper fabric from off the top and bottom.

Finish neckline with your favorite finish. I used FOE, but you could also do a knit binding. Just be sure to fold the ends under so the edges are finished.

3. Add Bottom Band

Cut a band with the following formula (adjust length as needed): Length = 3.5” by Width = (75% of Underbust Measurement) + 1”

*Optional* Hand sew hook and eye closure at top of zipper.

And you are done!!!

   

…..

Picot trim

Anyone else buy tons of picot elastic thinking you are going to make all the bras and underwear? Well picot elastic can easily be used for other items and is a great finish for a necklines as well!  This is a quick easy hack and all you need that is different from the original requirements is picot elastic!

We are only going to make very minimal changes.  My picot elastic was 1/4 inch so I did not bother trimming the neckline down at all.  We are going to cut the picot the same length as what the pattern calls for for the clear elastic.

 

Now press that top stitch cause pressing is the key to a really great finished product and finish the rest of your top as instructed.  You can also use this method for the armholes if you choose but sometimes picot can be scratchy, mine was super soft but I choose to just use it for the neckline.

 

…..

Lettuce hem

Next up we have the lettuce hem hack. This is an easy and fast way to finish your edges with a little added style!

First off, we need to trim the hem allowances at the neckline, sleeve edges, and bottoms of both front and back pieces of the pattern to account for not using a traditional hem on these edges.

Trim 3/8″ off of the neckline.

Trim 1/2″ from the sleeve edges.

And trim 1″ from the bottoms of both the front and back bodice pieces.

Now that we’ve got our pattern pieces properly modified, cut and sew up your top as usual, using the new trimmed pattern pieces.

Next, set up your serger for a rolled hemline. Consult your serger’s manual for exactly how to do this on your machine, but in a nutshell, you will use only one needle, narrow the stitch width, decrease the length and increase the lower looper tension.

Begin with the neckline of the shirt. Sew the neckline as if you were finishing with a rolled hem, but stretch the fabric firmly before and after the presser foot. The tighter you pull, the more waves your lettuce hem will have!

Repeat on the raw edges of both sleeves and bottom hemline.

And that’s it! Now you have a beautifully finished tee with cute lettuce hems.

 

 

Caitlin

…..

Higher side vents

 

Let give this dress a nice higher vent to add extra sexy to it!

 Here’s how I made this little hack.

I started with cutting the mid-length version and marking the vent line for the knee length.

I continue sewing up the dress according to the instructions. 

Here is a picture to show the different vent lines. I followed the directions for the vent except I used the knee length instead of the mid length marking. 

Hope you all love this hack!!

Andrea

….

Skirt

Next up we have a super easy, fun skirt hack. Nicole paired her skirt with the Sporty Piko crop but you can certainly wear it withe the cropped Hepburn top. Start by deciding where you would like the skirt to hit. Nicole is wearing a high waist style so she cut the pattern 1″ front and back pieces above the waist line. Now grab a 1″ knit elastic piece and stretch it around your waist (or high hip, depending on your skirt preference). Cut the elastic based on your waist and comfort. Sew the side seams and hem the bottom of the skirt following the tutorial instruction.

Using your serger or a zig zag stitch attach the elastic to the waist.

That’s it! All you have left to do now is enjoy your new skirt.

…..

Hepburn / Boundless mash

My turn!! You know there’s nothing I like more than a good dress! So once I have sewn the dress included in the pattern I just had to try mashing it with the Boundless skirt. Here is what I did:

Cut the preferred Hepburn style (tank, sleeves, etc) CROP top. Now grab the Boundless pattern (or even the Sunshine) and cut the waist skirt (not the empire one).

Sew the Hepburn crop top as instructed in the tutorial. Now grab some 1/4″ elastic and measure the opening of the bottom hem. Cut the elastic the same size as the measurement you just took and sew it in a loop.

All you have to do now is attach the skirt to the Hepburn top following the Boundless (or Sunshine) tutorial. Boom! One top…so many new possibilities!

…..

Hepburn / Sweetheart or Me Hearties mash

 

We could not end this hacks series without showing you how beautiful a Hepburn / Me Hearties (or Sweetheart) mash can be. Here is what how to get the look.

Judy has made he little star a 3/4″ sleeves, turtleneck crop top Hepburn and omitted hemming the bottom. Of course, you can choose any of the crop top styles included in the Hepburn pattern. Then she simply cut a Me Hearties circle skirt, sewed the side seams and hemmed the bottom.

All that left to do it attach the skirt to the top, following the Me Hearties instructions. Don’t forget the seam allowance is 1/2″.

Now tell me this cutie is not making you want to sew a Hepburn/Sweetheart mash for you too. I know that’s my next project!

Hope you enjoyed these easy hack as much as we enjoyed making them for you! Time to get sewing and remember to post your creations in the Patterns for Pirates Facebook group so we can all admire them.

Summer PJs easy hack

As with all new P4P patterns our blog team has some easy hacks ready for you to take your Summer Pjs up a notch. It is a sizzling summer after all…

Knit and FOE

Let’s start with a simple fabric switch. If you are anything like me you have piles and piles of knit fabric in your stash. Let’s make the Summer Pjs with jersey knit. The other replacement we are making is switching the bias tape for FOE (fold over elastic).

I used 5/8″ FOE for mine but any width bigger would work too. One of my favorite parts of making the Summer PJs with knit is that I can coverstitch the hem.

Sew the PJs as instructed in the tutorial. When adding FOE simply fold it in half and sew it on with a lightning bolt stitch or triple stretch stitch. You can get away with using a straight stitch since the pattern has plenty of positive ease so you won’t really be stretching the binding.

I left the FOE as is for the back strap but you can certainly fold that one over as well.

Use lots of pins when adding the long back strap. It will help if you steam press the FOE fold prior to pinning or clipping it in place.

That’s it! No changes made to the actual pattern pieces just fabric choice…easy peasy!

Lace Insert

If you are looking to make your Summer Pjs just a little more sexy…why not add a lace insert to the front of the top or nightie? Grab your favorite lace or very wide lace trim and let’s get started. Cut the fabric as instructed in the pattern. Using a disappearing pen, like a Frixion , mark on the front piece the “V” you would like to be lace. This is where you choose how “risque” you would like to make your pajamas. Mark another line 1/4″ inside of the first one. This will be your cutting line for the main fabric. Cute along the green line and remove the inside triangle.

Cut down your lace a 1/4″ bigger than the size of the bigger triangle. If you use gallon lace or trim make sure the pretty details (like Judy’s black accent) is at the top. Mark 1/4″ inside the V lace triangle with the disappearing pen or tailor chalk. This will be the stitching line.

Place your lace triangle over the front piece right sides together matching the stitching lines (red). Sew over the marked lines with a straight stitch, pivoting at the center V. Flip the lace piece inside the main fabric and finish the raw edges with a zig zag stitch. Top stitch 1/8″ away from the edge.

If your lace has a raw edge at the top, follow the pattern to add bias binding. If your using lace with a finished edge like Judy’s then simply skip the front bias tape.

All you have left to do now is enjoy your new sexy summer pajamas.

 

Ruffles

Ruffles can add such a soft, feminine detail and to me, the new Summer PJ’s has so many great places to add a ruffle. One of the first places is the legs. You can add ruffles to either the cheekie or shorts length. For this tutorial, I added ruffles to the shorts length.

To begin, you will want to assemble your shorts as directed by the tutorial, with the exception of hemming.

Once you’ve constructed your shorts, you will need cut your bands that will be used for the ruffles. The band needs to be 3″ x width of fabric. If you would like your ruffle more full, you can always sew two strips together to create a fuller look.

Once the strips are cut, you will want to press them in half, with wrong sides together.  Unfold your strips. With right sides together, stitch the ends together, using a 1/2″ seam allowance to create a loop.

Re-fold your band. Using the longest straight stitch on your machine, create your gathering stitches. You will want to use two rows of stitches, one at a 1/4″ from the raw edge and a second 5/8″. Repeat on other band.

Mark the middle of your band with a pin or clip. Pulling the bobbin thread, begin to gather your band. You will then want to match up the seam of the band with the crotch seam and the middle with the outside leg seam.

Evenly distribute your gathers and attach using a 1/2″ seam allowance. To finish, press the seam up and top stitch around the legs if wished!

Another quick and easy way to add ruffles to the Summer PJ’s is to add one to the neckline. I chose to add this to my daughter’s nightgown and we are both in love with the results. Many of the steps will be the same as above. After cutting out your top, stitch your side seams together. For the ruffle, you will want to cut a strip of fabric that is 3″ x double the width of the neckline. Press this strip of fabric in half, wrong sides together.

Using the longest straight stitch, create your gathering stitches by stitching a straight line at both 1/4″ and 5/8″ from the raw edge.

To gather, pull the bobbin thread until the strip is the same width as the neckline (** Leave 1/2″ ungathered on both ends to help reduce bulk when attaching the binding).  Baste around the armscyes and neckline to hold ruffle in place.

Continue to finish the top according to the tutorial, attaching the binding to the neckline as instructed, treating the ruffle and neckline as one.

Now that you have your youth and adult Summer PJs, and learned some easy hacks, time to get creative with your own pajamas. Don’t forget to share your pretties in the P4P Facebook group so we can all marvel at their beauty.

Alex and Erinn

Minute Maillot – Easy Hacks

Don’t let the name of the pattern fool you! While The Minute Maillot is a super quick sew, it is full of options. But you know us- we like to add more easy hacks that you can customize to your preference.

…..

Separates

Although I love the Minute Maillot as a one piece, I tend to wear a lot of two pieces in the summer and this pattern is so quick and easy to hack into a two piece!  Let’s jump right in!

Step 1 – Grab your both your front and back lining pieces.  All we need to do is add a bit of length to these pieces.  Add 1 1/4 inch to the bottom of each piece and then draw your side seam line down on a curve to match as shown here. You will do this on both your front and back piece.  NOTE: This is going to work best on the high back, the mid back will work but its going to leave you with a very thin back band.

 

Step 2: Cut out your pieces you will need one main and one lining of each the front and the back.  You will sew in your cups if using them just as instructed in the pattern but DO NOT sew on the underbust elastic! Assemble the top just as instructed in the pattern.

Step 3: Your top is now assembled and we just have to finish the bottom. Cut your 3/4 inch under bust elastic as stated in the chart and butt the edges together and zig zag in the round exactly like shown in the tutorial. .  Instead of attaching it to the lining only we are going to attach it in the same way as we did the neckline and arm elastic.  First we will quarter our elastic and suite and match them together.  The elastic will be on the lining side of the suite.  Baste your elastic to your suite making sure that the edge of your elastic matches the edge of both the lining and the main fabric.  I choose to serge my elastic on, you will need to slightly stretch the elastic to match your suite.  After you have it sewn in place you will flip it up to the lining side and top stitch in place, again just like all your other elastic in the suite you want to top stitch right on the edge of that elastic as close as you possibly can, this helps prevent the elastic from flipping out on you.

All done! Quick and easy and super cute! This would also work great in athletic fabric for a sports bra! I paired mine with the Hello Sailors bottoms but you could easily hack to make your own bottoms from this pattern as well!  You just need to figure out where you would like the top of your bottoms to hit and add 3/8th to that.  You would add 3/8 inch elastic to the top on the lining side and then top stitch in place!  You can also apply this same hack to the girls suit, just decide how long you would like your top you can make it as long or as short as you would like, add 1/2 inch to where you decided you would like it to finish and add 3/8 inch elastic to finish the bottom.  No measurements are provided for this but I would do an inch less then the finished measurement so you can stretch that elastic just a little bit.

…..

Low back strap

My favorite back option of the Minute Maillot is for sure the low one! I also feel like it gives me the opportunity to get even more creative. Let me show you how quick and easy it is to add a strap to the back.

Start by making the swimsuit’s low back option, any front option or leg you prefer. We will add the strap once the suit in completed. Place a quilting ruler at the bottom arm opening and measure the opening of the back at that level. In my case (1x) it is 9 inches.

Cut your back strap 6″ wide by the back opening you measured earlier. In my case I used a swim piece that was 6″x9″. This is a step you can customize to your liking. If you’d like a thinner strap you can certainly cut the fabric shorter than 6″. Fold the strap right side together lengthwise, sew along the top with a 1/4 or 1/2″ seam allowance (depending on your preference). Turn the strap inside out.

Bring back your swimsuit, back side up, and mark the point on the opening that matches the bottom arm opening.

Pin your strap in place making sure that the top of the strap matches the mark you just made on both sides of the back opening.

Sew the strap in place using a zig zag stitch, stretch stitches or your coverstitch. That’s all!

Tips: Using the same technique you can make the back with two or three thinner straps, two long ones  tied in a bow, two thinner ones crossed like an X….endless possibilities!

…..

Ruffles at the legs

Looking for one of the fastest way to make most little girls happy- add ruffles! For this hack, you will first need to cut and assemble your pattern according to the tutorial, stopping at the step which attaches the crotch seam. Once assembled, you will want to measure the width that you would like your ruffles to be. I choose to measure from the side seam to approximately the leg curve, giving me a 3″ area to add the ruffle to the front, as well as another 3″ to the back.

You will now cut the rectangles needed for the ruffles.  You will need a total of 6 rectangles, 3 for each side. To determine the total length needed, I took my 6″ I measured above and multiplied by 1.5. If you’d like a more full ruffle, you could multiply this width by 2. For the height, I cut each ruffle to 2″. My final ruffle measurements were 9″x 2″. After you’ve cut your rectangles, you will want to sew your gather stitches (the longest straight stitch on your machine). I like to sew two rows of stitches to help create more even gathers.

Beginning with your bottom ruffle, match the center of the ruffle with the side seam, then pin in place 3″ from the side seam on both the front and back bodice pieces. Pull your gather strings and adjust as needed.

Attach the ruffle using a narrow zigzag stitch. You may now remove the basting stitches.

Repeat these steps with both the middle and top layer, placing it 1″ above the previous layer.

After attaching the ruffles, finish sewing the crotch seam as directed in the tutorial and then finish by adding the elastic! Lastly, show it to that little cutie and see her face light up when she sees the added flair to her suit!


~Erinn

 

…..

Maternity

 

Hi Lovelies,

Today we are going to discuss how to hack the new suit to be maternity friendly. You’re going to need the Maternity Layer Me Up add on pattern piece and your front piece of the swimsuit. Okay, let’s get started!
First, before cutting fabric we will need to modify the front pattern piece.  You’re going to take the front piece of the swimsuit and you’re going to measure one inch above the High Leg cut line. From there you will have two pieces to add your LMU in the middle.
You’re going to tape the top area of the LMU maternity add on where the red line is in the picture by the bust line curve.
Then, you’re going to tape the bottom piece of the swimsuit by the bottom notches on the LMU pattern piece. You will now blend the bottom of the belly area on the LMU to bottoms swimsuit piece.
Now, you’ll use your newly drafted maternity front piece to cut out the front of your swimsuit (and your swim lining if you’re fully lining the front of your swimsuit).
Next, you will be gathering the center belly section. Instead of using elastic to gather like in the LMU add on instructions I did the traditional two basting stitches and gathered by hand to match the back swimsuit pattern piece.  You will start gathering at the top notch under the bust and go until the very last notch on the belly.
From here on out you will continue with the Minute Maillot instructions as normal. Bam, you’re done with your beautiful new maternity swimsuit!

Amanda S

 

…..

How Low Can You Go Back

I love a dramatic low back! The low back option included is a bit lower then natural waistline.  I kept seeing gorgeous Pinterest photos of super low backs and had to try one!

I marked a line from the high cut legline horizontally across my back piece.  Then marked a vertical line just continuing the back low cutline vertically down until it met with the horizontal line I already marked.  Using a french curve I drew the curve (you can also cut out and use the curve from the low option if you don’t have a french curve handy).

I sewed up the suit exactly the same, just lengthening the back elastic to match the lower line. (I didn’t measure, I just applied it as I sewed only stretching where needed).

Ta-Da! A super dramatic low back that would be stunning on any beach or romantic get away… I’ll have to try to get invited to one of those one day to show mine off 😉

Judy

Sporty Piko – easy hacks

Ahoy, matey! As with most of our new releases, the P4P blog team has some easy hacks ready for you to help achieve even more looks. First stop by the shop and grab the Sporty Piko and Youth Sporty Piko, then let’s get started.

….

Solid Back

You might have noticed that both the Sporty Piko and the Youth SP feature a color blocked back to allow for multiple prints or color fabric to be showcased. Well, what if you want a solid back without the horizontal seam? Super easy hack!

Start by printing your preferred style. Now grab the two back pieces. At this point you can do one of two things- remove the 1/2″ seam allowance from each piece and tape together (shown in first picture). Shown in the second picture, you could also fold each piece up 1/2″ and butt the two pieces together, matching the FOLD line and the side seam and …boom! There you have your new back pattern piece.

 

Cut your pattern pieces and sew the shirt as per the tutorial. Simply skip the steps that show you how to sew the two back pieces.

Tadah! All done! One more option to add to the Sporty Piko styles.

My little man absolutely loves his new shirt but if you want to treat yourself to an adult Sporty Piko with a solid back, simply follow the same steps and enjoy!

 

…..

Elastic crop top

Maybe you want a cute crop but aren’t interested in fussing with the drawstring option?  I’ve got you covered!

Follow all of the instructions for the crop option, including the 1″ hem.

Top stitch around the entire folded edge, leaving around a 3″ opening to thread the elastic through.  (I like to position my opening on the back portion of my items, but it’s really a personal preference.

Using 3/4″ knit elastic, cut a length that is your waist measurement, minus 2″.

Feed the elastic through the opening.

Overlap the raw edges of the elastic, being careful not to twist it, by 1″.  Sew the overlapped pieces together, using a stretch stitch.

Close up the opening of the bottom hem, and enjoy your new crop!

…..

Banded crop top

Elastic… draw string… and now we’re bringing to you a third option to finish off your crop top versions- a banded option. This is a quick and easy way to finish off your top, especially for those of us who are opposed to the dreaded finishing hem! 🙂

To create this look, you will need to cut out all of your pieces needed for the cropped version, as well as a band (discussed later). Once you’ve cut out your pieces, you will want to trim 1″ off of both the front and back pieces (everything else will remain the same).

Assemble your shirt as per the pattern directions. Once you’ve completed your shirt, it is now time to attach the band. You will want to measure the total bottom hem of your shirt. To calculate the final width of your band, you will take your total measurement x 90%. Then add 1″ for the seam allowance. For the women’s version, I recommend a length of 4″ and for the youth, a length of 3-4″, depending on where you would like the finished length to be.

Using the instructions for the banded version in the tutorial, attach your bad. That’s it! Go off and enjoy that new shirt you’ve just finished up using one of our three finishing options.

~Erinn and Nicole

Now that you got your patterns and looked over our easy hacks, time to sew! Remember to share your creations in the P4P Facebook group so we can all admire them.

Loggers – easy hacks

The new P4P Loggers (available in women and youth) are here! Needless to say the P4P team and blog contributors were very excited to show you these easy hacks that you can do to the Loggers in order to have even more options. Let’s get started!

…..

Peg Waistband

First comes the Pegs. Then comes the Logger… Up next, a Peg and Logger mash made in Heaven! Ever since the release of the Peg Leg add-on pack, I have been obsessed with the contoured waistband (What? You haven’t tried it yet? Grab a copy of it for FREE right here). Luckily, the Logger Pattern is another perfect way to show off and use the contoured waistband.

To create this look, you will need both the Logger and the contoured waistband pieces. One of the advantages to the Loggers is that you can use fabrics with just a small amount of vertical stretch. However, for the Pegs, 50% stretch is needed in both directions. So when choosing your fabric for the contoured waistband, it is KEY to make sure that it meets these requirements or else it won’t fit!

Begin by cutting out the necessary pieces. For the waist on your Logger, cut on the lower rise. As you can see in the picture below, I have have my Logger shorts with bands and then my pieces needed for the contoured waistband.

Next, assemble all pieces as written in the tutorials, including the waistband. Quarter both your Loggers and waistband. Slip your waistband over the Loggers, matching right sides together.

Attach your waistband, being sure to stretch the waistband only and NOT the Loggers. All finished! You have now created one of the most comfortable pair of pants with the most comfortable waistband that you will ever own! ~Erinn

 

…..

Capri Loggers

The Loggers patterns include 2 length, ankle and shorts. So let’s add a third. I personally love capri length leggings and joggers when biking so I knew I needed capri loggers too. Such an easy hack!

All you have to do is remove some length on both leg pieces. For the adult loggers I recommend removing about 7″ but you can go a little less or a little more. If you are not able to measure them you can use the Peg Legs capri length as a guide, just remember that the Pegs are hemmed while the Loggers have cuffs so make sure you accommodate for that.

Once you cut your fabric continue sewing them as per the tutorial. The only change left to do is in the cuffs width. Measure the leg opening and multiply that by 0.90 and add 1″ for the seam allowance. Keep the height of the cuffs pattern as is.

All you have left to do is add the cuffs to the legs following the same instructions in the tutorial. As always, press, press, press!

Shhh! Want to know a little secret? For my pair of capri loggers I actually used the exact cuffs from the pattern. Since my loggers are 100% cotton spandex with great stretch and recovery I could do that. Something to keep in mind, but do not do this if you are using French Terry or other knit with not so great recovery.

That’s it! Super easy, capri loggers to add to your lounging or workout gear.

…..

Swim Bottoms

The shorts version of the Loggers makes for the perfect swim short!  I used the youth version here for my girl but you can easily do the same for the women’s.  Construction is more or less the same, but I chose to line them with swim lining and did elastic vs the bands.  You can also adjust the inseam to your preference if you want them a little longer as they will finish a tiny bit shorter if adding swim elastic, or even keep the bands as shown in the original pattern.

…..

Grow With Me Loggers

One of the hardest things about sewing for our kiddos is how fast they outgrow items we spend hours making.  Well, here is a quick and easy way to make your little one’s Loggers last a bit longer.

You’ll start off by choosing the next size up for your pants.  Now print and cut out your pattern pieces making sure to use the yoga style waistband. I went with a low rise for this set but you can choose high rise as well.

Now go ahead and grab your ankle cuff piece because we are going to be doubling the height of that.  I did this by first tracing it on to a blank piece of paper. Then you’ll place it alongside your line edge shown in red so it’s doubled in size but still has the same fold line.  Tape it down and then cut out the entire piece as one shown by the green line.

Now cut all your fabric pieces out just as directed!

From here you’ll sew up exactly how it’s said to in the tutorial.  When it comes to wearing you simply roll the bands to best fit your child. Here is an example of it fully rolled and extended. As you can see my little needs it fully rolled but now she’ll be able to wear them much longer!

Don’t forget to share your creations in our facebook group! We can’t wait to see all your makes!

Michelle

Now that you purchased your Loggers and reviewed all of our easy hacks, time to start sewing. Make yourself or a loved one a pair and don’t forget to show it off in the Patterns for Pirates Sewing Group on Facebook. 

 

The P4P blog team! 

Naughty Nice + Sugar Spice PJs :: Easy Hacks

Our newest pajama patterns are just so perfect for the holiday season, aren’t they? So if it’s a party, let’s make it a pajama party with some easy hacks that will add even more options to the Naughty Nice and Sugar Spice PJs you’ll be making.

….

Zipper

 

Let’s start by switching the front of the Naughty Nice pajamas from a button/snap placket to a fun zipper. Fear not, it’s super easy! I personally find the zipper to take less time than adding all the snaps or buttons. Grab a 9″ zipper and let’s get started.

Sew the pajama as instructed in the tutorial, except for the neckband. You won’t be using the one in the tutorial, you’ll make a new neckband.

Lay your zipper right side down on the front opening. The to of the sipper will be at the curve. Sew it as close to the zipper teeth as possible. Using a zipper foot will make this easy.

Repeat the process on the other side of the zipper.

On the wrong side of the fabric, sew a straight stitch where the fabric and zipper meet and remove excess zipper.

Now that we added the zipper we need to create a new neckband. With the zipper closed measure the neck opening. I like to lay mine flat but you can measure anyway you feel comfortable.

Cut your neckband 85% of the neckline opening plus 1″ for seam allowance by 2.5 inches. Fold your neckband widthwise and round your open edge to resemble a henley neckband. Open then neckband and fold it lengthwise, wrong sides together. Give it a good press and mark the back and the quarter points.

Mark the quarter points on the neckline opening. With the zipper open, pin (or clip) the neckband in place.

Attach the neckband using a stretch stitch. Optionally, top stitch. I actually like to topstitch around the neckline and zipper right now, using a continuous stitch.

All done! You can use the same technique to add a front zipper to the Sugar and Spice PJs too. You will just have to adjust the zipper length.

…..

Lace Up Front

Want to spice up the naughty version or just want some extra fun detail? Instead of snaps or buttons, use grommets/eyelets on the front neckline.  Use as many or as little as you prefer.  I chose to do 4 spaced about 1.5″ apart.  Use drawstring, ribbon, lace or our knit fabric to create the string and lace it up!

 

 

 

…..

Hood

When I was searching for inspiration for my Naughty Nice PJs, I kept coming across hooded versions of this same style pajama.  I’m not sure how comfortable a hood would be to sleep in, but to have a little extra coziness around you while you’re lounging around?  Sign me up!  Plus, I think this pattern will translate so amazingly well for costumes next Halloween, and a hood is always a good thing to be able to attach for those as well.

You can use your favorite hood piece from any pattern.  I chose to use the Women’s Henley hood piece.

Assemble your hood piece like you normally would.  I chose not to line mine and hem it instead.

You’ll need to take two measurements:
— The width of the bottom edge of your hood, where it will attach to your PJs.
— The full length of the neckline + placket opening.

You won’t be using the neckband piece that comes with the pattern.  Instead, you’ll need to do a little more math.

(Neckline Opening Measurement – Hood Width Measurement) / 2 + 1″ Seam Allowance

This will give you your new placket piece length.  You’ll want two of them, for either side of the openings.

With your placket pieces folded in half (wrong sides together), pin it along the front placket opening and stitch.  Repeat with the second placket piece on the opposite side.  Follow the instructions just like the Naughty Nice / Sugar Spice patterns call for, to finish the bottom of your placket pieces.

With right sides together, align your hood piece along the raw edges of the neck opening.  Pin and stitch.  You’re done!

…..

Leg Placket

 

The last easy hack we wanted to show you is geared towards the Sugar and Spice. We all know how changing a bitty’s diaper can be difficult when they get all wiggly, especially in the middle of the night. So I wanted to show you how to add leg plackets to make changing a little easier.

Make the pajamas as instructed in the tutorial but do not stitch the inseam. Instead, add the cuffs flats, right sides together.

Once you add the cuffs, your pajama legs will look like this.

Open the PJ legs and measure the front and back inseams.

Cut two strips of fabric and interfacing that will be the measured length plus 1″ by 2″ width. Add the interfacing to the placket, fold and press lengthwise.

Fold the placket pieces right sides together and sew a stitch along each short end. Use a 1/2″ seam allowance. Cut the seam allowance to about 1/8″ and turn outside out. Press.

Pin each placket strip to the leg opening, making sure you match the front placket to the front opening and the back placket to the back.

Stitch in place and top stitch. If you used a serger to add your plackets, take a look over this blog to see how to finish the serger tails.

All you have to do now is add your snaps. Space them about 1 – 1.5″ apart from each other.

All done! Now you have easy diaper change Sugar Spice Pajamas!

There you have it, 4 easy hacks to give your pajamas even more options! We can’t wait to see what your Naughty Nice and Sugar Spice Pajamas will be. Post your creations in the P4P group!

Alex, Nicole and Katy

Featured Patterns