Happy Holidays, Pirate Friends!  We are excitedly back for another year and another round of holiday freebies to share with you!  Over the years, we’ve compiled different tutorials and patterns that we think would make *perfect* gifts for your friends and family. Curious about what we’ve already released in the way of holiday freebies? Head right here to see all of them: Holiday Freebies Roundup.

Today, we are bringing you the: Bear Hug Rug!

The Bear Hug Rug is pretty much a giant stuffed animal, with function. It can be used as a rug on the floor, while relaxing or reading a book. It can be used as a blanket with a big ole’ head for cuddling up with. Or it can be used as a giant stuffed animal, ready to be loved.

The pattern construction is super simple and the results are so fun. We hope you love it!

Supplies Needed:

• Bear Hug Rug pattern pieces
• Fabric Requirements: Fleece / Minky / Faux Fur, etc, 54″ wide
  • 2 Yards Main
  • 2 Yards Lining
• Fiberfill (for head)
• Scraps of fabric for facial features
• Buttons / Embroidery Thread for Eyes

TUTORIAL

Place 2 ear pieces, right sides together.

Using 1/2″ seam allowance, sew around entire round edge.

Turn right side out and place pin/clip at the middle, bottom edge. Repeat for second ear.

**Tip from our testers: if your ears are on the floppy side, you might want to add a little polyfil to them to help them stand up.

On head piece, use the pattern piece to place pin/clip for ear markings.

With right sides together, match ear pieces to markings on the main head piece. Baste ears in place.

On main snout piece, center the nose piece and attach using your favorite applique stitch.

Note: If nose fabric is woven / can fray, be sure to use an interfacing before fixing it to the snout to avoid future issues with fraying.

With main snout facing up, place lining fabric on top, right sides together.

Sew around entire outer edge, using 1/2″ seam allowance.

Clip curved edges, using pinking shears / “v” pattern to help with a smoother turned edge.

Careful not to cut through the main fabric, clip a hole through the middle of your lining fabric piece.

Turn the snout right sides out, through the hole you just cut.

Press out all of your seams.

Place the snout piece, centered on the main head piece. Edge or applique stitch snout to attach it.

Add your eyes.

**I used these large buttons and hand stitched them on. You can also choose to embroider this detail, or add fleece circles. Whatever your preference is!

Your bear’s face should be nearly complete!

With the head right side up, place the lining fabric on top, right sides together.

Using 1/2″ seam allowance, sew around the outer curved edge, leaving about 5″ open at the bottom for turning.

Turn the head right sides out, through the opening.

Being sure not to overstuff the head, fill it with fiberfill.

Using a blind stitch, close the opening on the head piece.

With the body pieces right sides together, sew around entire outer edge, leaving a 5″ opening for turning.

Clip all of your extra seam allowance for easier turning.

Turn through the opening.

Tuck your seam allowances into the opening and blind stitch closed.

Align the head between the front legs.

Hold head in place and flip both the body and head over. By hand, use a whip stitch to secure the head to the body piece.

I like to use a wider-eyed needle, with embroidery floss, for some extra hold.

You’re finished!

Check out what our fabulous testers were able to create with this very same tutorial!

I la-la-love when you share your photos with me!  Head over to the Patterns for Pirates Facebook Group and show us what you’ve made!

Happy Holidays, Pirates!

Happy Holidays, Pirate Friends!  We are excitedly back for another year and another round of holiday freebies to share with you!  Over the years, we’ve compiled different tutorials and patterns that we think would make *perfect* gifts for your friends and family. Curious about what we’ve already released in the way of holiday freebies? Head right here to see all of them: Holiday Freebies Roundup.

Today, we are bringing you the: Braided Infinity Scarf!!

If you were looking for a quick gift to give someone, look no further. Because this “braided” infinity scarf just might do the trick! I don’t want to toot my own horn just yet, but I think you might love this even more than the Hidden Pocket Infinity Scarf from a couple of years ago. We will see, won’t we? 😉

Supplies Needed:

• Two (2) 18″ L x 54″ or (width of fabric) W pieces of knit fabric

Lay one piece with right side facing upward, and fold in half meeting the long edges together, right sides together.

Sew along long, raw edge, using 1/2″ seam allowance.

Turn piece right side out.

Repeat with second fabric piece.

Lay one tube of fabric in half, in a “u”-shape

Lay second tube of fabric on top, in a similar “u”-shape.

Reach your hand over the top fabric loop, and through the bottom fabric loop.

Gather both ends of the top fabric with your hand.

Pull the ends through the bottom loop.

Separate the top fabric ends.

Put your hand through the bottom loop and grab the end furthest from you.

Pull end through the loop.

Put your hand through the bottom loop and now grab the end closest to you.

Pull end through the loop.

Adjust the “braids” to your liking.

Open up the ends and match the opposite sides to one another.

With right sides together, match up the two seams along the raw edges.

Pin / clip around the opening, matching right sides together.

**This step is a little tricky. You won’t be able to align the two pieces all the way around. Go as far as you can without stretching out your fabrics.

Using 1/2″ seam allowance, sew around entire raw edge. Leaving an opening for pulling/turning the fabric.

Pull the fabric through, to turn everything right sides out.

Tuck the seam allowances into the opening.

Pin and, using your favorite stitch, close the opening.

You’re finished!

In case you consider yourself a more “visual learner” here’s a video tutorial that walks you through the entire tutorial, start-to-finish.

Check out what our fabulous testers were able to create with this very same tutorial!

I la-la-love when you share your photos with me!  Head over to the Patterns for Pirates Facebook Group and show us what you’ve made!

Happy Holidays, Pirates!

Happy Holidays, Pirate Friends!  We are excitedly back for another year and another round of holiday freebies to share with you!  Over the years, we’ve compiled different tutorials and patterns that we think would make *perfect* gifts for your friends and family. Curious about what we’ve already released in the way of holiday freebies? Head right here to see all of them: Holiday Freebies Roundup.

Today, we are bringing you the: Paw-fect Stocking!!

If you’re anything like me, your fur family members also get visits from Santa Claus — or maybe Santa Paws? (ba-dum-ching!) We’ve always hung stocking for our pups and filled them with toys and treats. And since we added another furry family member this year to my own household, I felt like maybe it was time to make new stockings for all three of our babies!

And I’m thinking maybe you might like this for your canine and feline family members as well!

Supplies Needed:

• Paw-fect Stocking pattern pieces
• 1/2 Yard each: Outer + Lining Fabrics and Fusible Fleece Interfacing
• 1/4 Yard Accent Fabric (for cuff and paw details)

Prepare all of your pieces.

Cut:
— 2 each: Main, Lining + Interfacing Stocking Pieces
— 2 Large “Toes” in Accent Fabric + Interfacing
— 2 Small “Toes” in Accent Fabric + Interfacing
— 1 “Pad” in Accent Fabric + Interfacing
— 1 Cuff in Accent Fabric
— 1 Hanging Tab in Accent Fabric

Apply interfacing to the main outer stocking pieces and the paw print applique pieces.

Using the stocking piece as a guide for placement, lay out the applique pieces.

Using your favorite stitch, applique the pieces to the front stocking.

Place the back outer stocking piece on top of the front piece, right sides together.

Using 1/2″ seam allowance, sew along all edges, leaving only the top, straight edge open.

Trim down your seam allowance, and clip into the corner points of the paws, being careful not to cut your stitches.

**Repeat last three steps with stocking lining pieces.

Leave your lining piece wrong sides out, and turn your main piece right sides out. Slip the lining into the main piece.

Fold hanging tab in half, wrong sides together. Iron.

Open up hanging tab piece and fold outer long edge toward crease. Iron.

Repeat with other outer edge.

Edge stitch along double folded edge. 

Fold hanging tab in half. 

Place hanging tab inside of stocking. Align it just behind the side seam, toward the back of the stocking. Clip or pin in place. 

Fold cuff piece in half, along short edges. Right sides together. 

Fold in half again, this time meeting the shorter raw edges together. 

Sew along side edge, using 1/2″ seam allowance. 

Flip cuff right sides out. Using pins / clips, mark half points of cuff. 

Slide cuff piece inside of the stocking, aligning the half points to the side seams. 

Sew along entire raw top edge, using 1/2″ seam allowance. 

Pull cuff up and out of the stocking. 

Flip cuff down toward body of stocking. 

You’re finished! (Don’t forget to press your stocking before hanging it up!) 

In case you consider yourself a more “visual learner” here’s a video tutorial that walks you through the entire tutorial, start-to-finish.

Check out what our fabulous testers were able to create with this very same tutorial!

I la-la-love when you share your photos with me!  Head over to the Patterns for Pirates Facebook Group and show us what you’ve made!

Happy Holidays, Pirates!

Happy Holidays, Pirate Friends!  We are excitedly back for another year and another round of holiday freebies to share with you!  Over the years, we’ve compiled different tutorials and patterns that we think would make *perfect* gifts for your friends and family. Curious about what we’ve already released in the way of holiday freebies? Head right here to see all of them: Holiday Freebies Roundup.

Today, we are bringing you the: Hickory Hat!

The Hickory Hat is a classic “aviator” or “lumberjack” style cap. It is available in four sizes, for head circumferences 18″ – 24″ and was drafted for non-stretch fabrics. Grab all of your favorite fun furs + fleeces, because this pattern is perfect for those!

**If using a super plush / thick fabric, you may want to size up — as those fabrics take up a bit more space and leave less room for your noggin.

Supplies Needed:

• Hickory Hat pattern pieces
• 1/3 yard fabric each (outer and lining)
• Optional Buttons

TUTORIAL

Cut all of your pieces. The assembly for the lining and outer cap will be the same for the first few steps.

With a pin or clip, mark the middle points of the curved side cap pieces, and both sides of the middle cap of your lining fabric.

With right sides together, place the side cap piece on top of the middle cap. Aligning them at the center points.

Ease the pieces together, and sew using 1/2″ seam allowance.

Using pinking shears, or cutting with a “v”, trim excess fabric along curved edge.

**Repeat with second side cap piece. And repeat all steps with outer fabric.

Place the ear flap pieces with right sides together.

Using 1/2″ seam allowance, sew along entire side and bottom edges. Leave the top, straight edge open.

Trim all excess seam allowance, making sure to pay special attention to the corner points. Clip as close to your stitches as you can, without going through them.

Turn right sides out. With a pin or clip, mark the middle point of the top, raw edge.

Place the brim flap pieces with right sides together.

Using 1/2″ seam allowance, sew along entire outer edge, leaving the top, straight edge open.

Clip excess seam allowance. Turn right sides out.

Locate the middle front and back of the cap lining piece and mark with clips / pins.

With lining fabrics right-sides-together, match the ear flap piece to the lining cap piece.

Baste in place.

Repeat with the front flap piece. With lining fabrics right sides together, match front flap piece to the lining cap piece at the middle front point.

Baste in place.

Locate the outer cap piece. Place it in front of you, wrong sides facing out.

Place the lining piece (with the ear flap and front flaps basted onto it) inside of the outer cap. Tuck the flap pieces inside and align the seams against each other.

Using 1/2″ seam allowance, sew along entire circle, leaving 3″ opening for turning.

Turn right sides out. Tuck opening seam allowance in. Pin, and blind stitch the opening shut.

If desired, tack the front flap up — using buttons or a quick hand stitch.

You’re finished! Go wear your new Hickory Hat and then make 10 more. You know you want to!

——–

In case you consider yourself a more “visual learner” here’s a video tutorial that walks you through the entire tutorial, start-to-finish.

Check out what our fabulous testers were able to create with this very same tutorial!

I la-la-love when you share your photos with me!  Head over to the Patterns for Pirates Facebook Group and show us what you’ve made!

Happy Holidays, Pirates!