Take the Plunge Swimsuit :: Dress & Peplum Hack

We are all loving the new Patterns for Pirates Take the Plunge Swimsuit that was just released! So naturally, we had to take this pattern a step further and morph it into some cute apparel! In this tutorial I am going to show you how to add some super cute skirts in place of the swim bottoms to create adorable everyday garments! As a total bonus you can follow the swim pattern instructions to add built in bra cups and under bust support. How awesome!

:: Fabric Requirements ::

This pattern is intended for pretty sturdy but stretchy swim knit. So in order to turn this into a comfortable dress I recommend choosing a main (outside) fabric that has both great 4-way stretch and good recovery. Brushed poly, rayon spandex, cotton spandex and maybe a very very stretchy scuba or liverpool would work. For the bodice lining you will want to choose something light and stretchy such as rayon spandex or brushed poly. All versions pictured in this tutorial were made using double brushed poly spandex. Also, you do not need to use swim elastic on this, regular braided elastic is sufficient. I will also detail how you may omit the elastic altogether for the full back option.

:: Assemble your Bodice ::

First things first. Go ahead, cut out all pieces of your bodice exactly as instructed in the pattern. None of these pieces need to be altered. You can choose any strap/back option. Choose to add bra cups and under bust support elastic if you feel like having an all-in-one dress! I personally love the push up bra cups for a little extra support when going with the all-in-one option. Remember, you do not need to use swim elastic for non-swim garments. Traditional braided elastic will be a little easier to sew with. Go ahead and assemble the bodice exactly as instructed by the pattern and skip to the Skirt Options portion of this tutorial.

{Optional} :: If you are choosing not to include bra cups, you are using the full back option AND you are using a sturdier fabric like brushed poly or cotton spandex, you may omit the elastic. Fabrics like rayon spandex and ITY, and built in bras that provide support do require that elastic be used to prevent your straps from stretching out. Also, the low back or halter version likewise require elastic to hold the dress up. To omit the elastic follow along with these next steps before getting to the skirt options.

First construct the front bodice pieces as instructed by the tutorial. You can skip the part when you clip the inner strap to fold it over and attach elastic. Instead sew the entire length up the strap to give a nice seam.

Next attach the main back bodice to the lining back bodice by laying them right sides together and stitching along the neckline. Then match up all bodice pieces at the shoulders right sides together and stitch.

Topstitch inner neckline now if preferred. Next, lay your bodice out and fold the back bodice over on top of the front bodice pieces, matching up side seams main fabric to main fabric. Stitch side seams together and then baste the front bodice pieces together along the bottom as instructed in the pattern tutorial.

At this point you can baste stitch the outer armholes to prevent fabric shifting. I chose to run my serger around them. Fold the unfinished edges under about 3/8″  and topstitch armholes in place. The burrito roll method to enclose the armholes cleanly does not work here. There is simply too much fabric on the front bodice to work around. Now it’s time to add your skirt!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

:: Skirt Options ::

There are 3 skirt options that I will show you. The first option is a super fun peplum length. Cut your peplum piece to match the “skirt length” on the swimsuit pattern. I suggest measuring yourself for a preferred peplum length and double checking it against the pattern. You might want to shorten it up an inch or possibly add length depending. See  the option below for more details on how to measure your skirt length. Once cut, simply follow the pattern directions and omit the swim bottoms to complete the top.

NOTE: The “peplum length” on the swim pattern will be too short for an everyday top.

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

Next, I will show you an above the knee half circle skirt option. Decide where you would like your dress to land and measure skirt length by holding the end of the tape at your natural waist and allowing the tape to drape along your body. Add 1/2″ to that measurement for your bottom hem and another 3/8″ for your seam allowance. I also like to add an extra inch or so to this measurement just to be safe! You can always trim the hem length down at the end but you can’t easily add extra later! Place your TTP skirt pattern on your fabric and measure out as indicated below. Alternatively you can grab skirt lengths from the Patterns for Pirates Sweetheart Peplum and Dress for the ‘at the waist’ option if you already own that pattern.

Cut out your skirt piece, trying to keep your curve as even as possible. Cut your waistband (main and lining as indicated the the pattern) and assemble as instructed omitting the swim bottoms. Attach your waistband/skirt to your bodice. I do recommend cutting both the main waistband and the lining waistband to add structure. Try on your dress for length, hem it and you’re finished!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

For the final option I will detail how to add a gathered skirt in place. This option is really simple. If you own the Boundless dress pattern you can simply attach the waistband from the TTP pattern instructions to the gathered skirt size from the Boundless. If you don’t own that one you can simply cut your rectangle skirt piece by doubling the waistband length and finding your desired skirt length through measuring as described in the previous option. Cut two skirt panels and sew them together if your fabric isn’t wide enough. Direction of greatest stretch should go across the 2x waistband length. See Illustration below:

Gather one of the doubled waistband length sides by running a long baste stitch across and pulling the bobbin thread. Fit and sandwich the gathered end between the waistband pieces being sure the main fabrics are right sides together. Stitch in place.

Fold the long ends of the skirt to meet right sides together. Stitch down the entire side seam, from waistband to bottom of the skirt. Now attach your skirt/waistband to your bodice, right sides together. Try on your dress and hem to the appropriate length. You’re all done!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

So you can see how versatile this swim pattern really is! I hope you have all found this tutorial to be helpful. Go forth, make some swimsuits, peplum tanks and dresses for the summer. Share them with us in the Patterns for Pirates Facebook group. Don’t forget to check out the TTP pattern release roundup for some more swimsuit photos and check out the hack post for some more fun Take the Plunge swimsuit options!